2inch transparent T type 3 male disc filter, irrigation filter

Disc irrigation filter 2 inch transparent

Disc filter

T type

Size: 2″ inch.

Thread: BSP/NPT

Max. Flow rate: 25 M3/H

Max. working pressure 10 bars

Category: .

Product Description

Disc filters are a cross between a screen filter and a media filter, with many of the advantages of both. Disc filters are good at removing both particulates, like sand, and organic matter. A disc filter consists of a stack of round disks. The face of each disk is covered with various sized small bumps. A close up view of the bumps reveals that each has a sharp point on the top of it, somewhat like a tiny pyramid. These bumps are very small, thus a typical disc looks a lot like the old vinyl 45 RPM records! Because of the bumps, the discs have tiny spaces between them when stacked together. The water is forced between the disks, and the particulates are filtered out because they won’t fit through these gaps. The organics are snagged by the sharp points on the bumps. For automatic cleaning of the filter the disks are separated from each other which frees the debris to be flushed out through a flush outlet. For less expensive disk filters you must remove the disks and hose them off.

 

Features:

  • Made of  polypropylene material which has Excellent chemical and weather resistance and durable.

  • Operation is easy and requires no special tools

  • Long-term operation with little maintenance or cleaning

  • Maximum operating pressure 10 kg/cm² (142 psi).

  • Available in standard filtration 120 mesh. (Other mesh sizes are available On demand).

  • Available in 1 1/2″-4″, BSPT & NPT male threaded inlet & outlet.

Application:

  • Used for water filtration of drip & landscape irrigation system.

  • Suitable to use where precision filtration is required like reclaimed water application.

PP compression fittings are widely used in water supply and irrigation. Kinson compression fittings for HDPE pipe are made by high quality PP material with UV protection, both material and fittings are approved use with drinking water.
We have three different types of PP compression fittings, all comply with standards DIN 8076-3, UNI 9562, UNI 9561, BS 5114/75.
Kinson compression fittings can be installed on PE pipes which are in compliance with standards DIN 8072, DIN 8074, ISO 4427, EN 12201. The threaded version is BSP.

Material: PP
Size range: 20-110mm
Working Pressurel: PN16
Color: Black, Light blue, Dark bule
Easy installation.

Visit our other products page:

Related Products